Skip to content
CalcWolf Home कंक्रीट कैलकुलेटर
Home

How Much Concrete Do You Need?

Calculate cubic yards of concrete for slabs, footings, columns, and stairs. Includes bag count and cost estimate.

📅 Updated April 2026 Formula verified 📖 4 min read 🆓 Free · No sign-up

Calculation

Volume = L × W × D (meters)। 6×3×0.10 = 1.8 m³ + 10% = 2 m³। RMC (Ready Mix): ₹4,000-6,000/m³। Manual mix: ₹3,000-4,500/m³। M20 grade residential standard। RMC better quality but minimum order 1-2 m³।

Mix Ratios

M20 (1:1.5:3): cement:sand:aggregate। 1 m³ M20: ~8 bags cement + 0.42 m³ sand + 0.83 m³ aggregate। UltraTech, ACC, Ambuja: top cement brands।

⚡ CalcWolf Insight

The most common DIY concrete mistake: ordering too little. Concrete cannot be "added later" — the cold joint between pours is a permanent weakness. Order 10% more than calculated and send back what you do not use.

Frequently asked questions
3×3 slab?
10 cm: ~1 m³। RMC: ₹4,000-6,000। Manual: ₹3,000-4,500।
RMC or manual?
Small jobs (<1 m³): manual। Larger: RMC (better quality, less labor)।
✓ Math logic verified against primary sources → See our verification process
Kevin Glover
Founder, CalcWolf · GLVTS · Blickr
All formulas sourced from primary references — IRS publications, peer-reviewed research, and official standards. Results are tested against independent reference calculators before publishing. Rates and brackets updated when official sources change. Editorial policy →
🐛 Report a Calculator Error
Found a bug or outdated data? Reports go directly to Kevin and are reviewed personally.